5-18-09
Our group had a hard time yesterday, our robot stopped working and we are still trouble shotting the problem. The problem with our robot was the motor that turned the door and we had to change the gears for it.
5- 19- 09
Our group lessend the amount of codes we had and the robot started to work a little bit better. We think that the amout of codes was over welming the system. After we lessend the codes the robot was spining out of control.
5- 22- 09
We have been focusing on our reaserch more than anything, becuase we had a hard time finding the info we needed in our preveous try.
5- 27- 09
We have been focusing on our reaserch because we need to finish our board. Most of our day was spent taking surves and typeing information. we still need to glue every thing down.
5 - 29 - 09
During the Robo fair our robot proformed ok because a lot of peaces started to break, for example the moter that turns the door stated to break by the gears were conecting wrong. 5/29
Our robot was some what succesful and it held up but there were a few gliches and we had to snap on a few new thing s and we got the machine working again. Other than that the robot worked great.
5-18-09
Our group had a hard time yesterday, our robot stopped working and we are still trouble shotting the problem. The problem with our robot was the motor that turned the door and we had to change the gears for it.
5- 19- 09
Our group lessend the amount of codes we had and the robot started to work a little bit better. We think that the amout of codes was over welming the system. After we lessend the codes the robot was spining out of control.
5- 22- 09
We have been focusing on our reaserch more than anything, becuase we had a hard time finding the info we needed in our preveous try.
5- 27- 09
We have been focusing on our reaserch because we need to finish our board. Most of our day was spent taking surves and typeing information. we still need to glue every thing down.
5 - 29 - 09
During the Robo fair our robot proformed ok because a lot of peaces started to break, for example the moter that turns the door stated to break by the gears were conecting wrong.
5/29
Our robot was some what succesful and it held up but there were a few gliches and we had to snap on a few new thing s and we got the machine working again. Other than that the robot worked great.